|
Made modules for the pieces so that they can be checked using a new intersection |
|
|
Extended the payload floor to reach the back of the cartridge so that the back |
|
|
Fixed the simple cartridge description; indicated the nature of the back cavity. |
|
|
Introduced more parameterisation for a simpler cartridge, making rounding |
|
|
Added tag shapeways-3686237-20150813 for changeset 050422da2f7d |
|
|
Added a PCB feature and top surface configuration for testing purposes. |
shapeways-3686237-20150813 |
|
Repositioned the PCB in order to better test alignment. Fixed the PCB depth. |
|
|
Increased the back depth by 0.5mm. |
|
|
Increased the back payload depth, making the back wall thinner. |
|
|
Added tag shapeways-3686237-20150804 for changeset 6d3bf06a7603 |
|
|
Fixed the sense of the PCB support holes on the test PCB. |
shapeways-3686237-20150804 |
|
Added a "short PCB" setting to enable the top "bump" in the PCB support struts. |
|
|
Added model presets and support for wide PCBs and associated connecting lugs. |
|
|
Fixed the comment about the back cavity in the connector portion. |
|
|
Introduced explicit variables for the lower and upper extents of the cartridge. |
|
|
Added a ROM cartridge mode setting and tidied the PCB generation. |
|
|
Extended the floor of widened cartridges, also fixing connector outer surface |
|
|
Introduced support for "left-justifying" a widened cartridge. |
|
|
Separated the payload and connector widths so that the former can be changed |
|
|
Fixed the edge connector tab alignment. Separated the back payload and connector |
|
|
Added an option to turn off filleting for quicker previewing. |
|
|
Rounded off the back PCB lugs for easier connection. |
|
|
Rounded the extension of the back piece by making the "extra" part a separate |
|
|
Added a PCB model for checking. |
|
|
Fixed front PCB support positioning and made the floor depths more accurate. |
|
|
Added configuration options for separating the pieces and omitting features. |
|
|
Changed the back dimensions to only incorporate a minimum overlap, with extra |
|
|
Permitted the configuration of various features. |
|
|
Changed the cavity features around the base of the cartridge to use internal dimensions. |
|
|
Introduced internal front and back depth measurements. |
|
|
Changed the measurements to be based on an internal volume. |
|
|
Simplified the PCB support positioning slightly. |
|
|
Reverted the position of the "floor" to 13.5mm and reduced the thickness to 1mm. |
|
|
Fixed the positioning of the PCB support. |
|
|
Made side wall adjustments possible, increasing them from 1.5mm to 2mm. |
|
|
Added front "lug" feature to mate with the back "lug". |
|
|
Increased the front/back overlap for improved cohesion. |
|
|
Made the depth of the back part more readily configurable. |
|
|
Re-expressed the cutout measurements in terms of the groove dimensions. |
|
|
Improved the expression of the inner edge cutouts. |
|
|
Made the sides of the front part thicker with grooves to support the inner edge |
|
|
Added the extra PCB support "bumps" inside the top of the case. |
|
|
Re-added missing PCB support parameterisation. |
|
|
Added PCB "lug" definitions and made module definitions for supports and lugs. |
|
|
Introduced the slight "inset" of the PCB support. |
|
|
Incorporated measurements from Dave H's CAD file. |
|
|
Added copyright and licensing information. |
|
|
Added a justify module in order to simplify some transformation code. |
|
|
Added a cube_at "macro" to reduce duplication somewhat. |
|
|
Added transformations to show the front and back parts side by side. |
|
|
Fixed positioning of PCB support strut bumps along with various measurements. |
|
|
Made the left and right bumps in the PCB support struts different. |
|
|
Added rudimentary bumps to the PCB support struts on the back part of the cartridge. |
|
|
Added PCB support struts to the front part of the cartridge. |
|
|
Added PCB support struts to the back part of the cartridge. |
|
|
Separated the parts in order to be able to generate an STL file. |
|
|
Added extra height to the cuboid used for filleting/rounding. |
|
|
Moved incorrectly located removal of the inner top portion of the front part. |
|
|
Separated the front and back parts of the cartridge for individual manipulation. |
|
|
Fixed the rounding of the top edges for the two separate parts. |
|