Summary
Shortlog
Changelog
Graph
Tags
Bookmarks
Branches
Files
Help
Search
AcornElectron
Shortlog
(0)
-60
tip
2016-04-10
Paul Boddie
files
Made modules for the pieces so that they can be checked using a new intersection
2016-04-10
Paul Boddie
files
Extended the payload floor to reach the back of the cartridge so that the back
2016-04-08
Paul Boddie
files
Fixed the simple cartridge description; indicated the nature of the back cavity.
2016-04-08
Paul Boddie
files
Introduced more parameterisation for a simpler cartridge, making rounding
2015-08-13
Paul Boddie
files
Added tag shapeways-3686237-20150813 for changeset 050422da2f7d
2015-08-13
Paul Boddie
files
Added a PCB feature and top surface configuration for testing purposes.
shapeways-3686237-20150813
2015-08-13
Paul Boddie
files
Repositioned the PCB in order to better test alignment. Fixed the PCB depth.
2015-08-13
Paul Boddie
files
Increased the back depth by 0.5mm.
2015-08-13
Paul Boddie
files
Increased the back payload depth, making the back wall thinner.
2015-08-04
Paul Boddie
files
Added tag shapeways-3686237-20150804 for changeset 6d3bf06a7603
2015-08-04
Paul Boddie
files
Fixed the sense of the PCB support holes on the test PCB.
shapeways-3686237-20150804
2015-08-03
Paul Boddie
files
Added a "short PCB" setting to enable the top "bump" in the PCB support struts.
2014-12-12
Paul Boddie
files
Added model presets and support for wide PCBs and associated connecting lugs.
2014-12-11
Paul Boddie
files
Fixed the comment about the back cavity in the connector portion.
2014-12-11
Paul Boddie
files
Introduced explicit variables for the lower and upper extents of the cartridge.
2014-12-11
Paul Boddie
files
Added a ROM cartridge mode setting and tidied the PCB generation.
2014-12-07
Paul Boddie
files
Extended the floor of widened cartridges, also fixing connector outer surface
2014-12-06
Paul Boddie
files
Introduced support for "left-justifying" a widened cartridge.
2014-11-24
Paul Boddie
files
Separated the payload and connector widths so that the former can be changed
2014-10-10
Paul Boddie
files
Fixed the edge connector tab alignment. Separated the back payload and connector
2014-10-08
Paul Boddie
files
Added an option to turn off filleting for quicker previewing.
2014-10-08
Paul Boddie
files
Rounded off the back PCB lugs for easier connection.
2014-10-08
Paul Boddie
files
Rounded the extension of the back piece by making the "extra" part a separate
2014-10-07
Paul Boddie
files
Added a PCB model for checking.
2014-10-07
Paul Boddie
files
Fixed front PCB support positioning and made the floor depths more accurate.
2014-10-07
Paul Boddie
files
Added configuration options for separating the pieces and omitting features.
2014-10-07
Paul Boddie
files
Changed the back dimensions to only incorporate a minimum overlap, with extra
2014-10-07
Paul Boddie
files
Permitted the configuration of various features.
2014-10-07
Paul Boddie
files
Changed the cavity features around the base of the cartridge to use internal dimensions.
2014-10-06
Paul Boddie
files
Introduced internal front and back depth measurements.
2014-10-06
Paul Boddie
files
Changed the measurements to be based on an internal volume.
2014-06-10
Paul Boddie
files
Simplified the PCB support positioning slightly.
2014-06-10
Paul Boddie
files
Reverted the position of the "floor" to 13.5mm and reduced the thickness to 1mm.
2014-06-07
Paul Boddie
files
Fixed the positioning of the PCB support.
2014-05-18
Paul Boddie
files
Made side wall adjustments possible, increasing them from 1.5mm to 2mm.
2014-04-29
Paul Boddie
files
Added front "lug" feature to mate with the back "lug".
2014-04-23
Paul Boddie
files
Increased the front/back overlap for improved cohesion.
2014-04-23
Paul Boddie
files
Made the depth of the back part more readily configurable.
2014-04-23
Paul Boddie
files
Re-expressed the cutout measurements in terms of the groove dimensions.
2014-04-23
Paul Boddie
files
Improved the expression of the inner edge cutouts.
2014-04-23
Paul Boddie
files
Made the sides of the front part thicker with grooves to support the inner edge
2014-02-22
Paul Boddie
files
Added the extra PCB support "bumps" inside the top of the case.
2014-02-22
Paul Boddie
files
Re-added missing PCB support parameterisation.
2014-02-22
Paul Boddie
files
Added PCB "lug" definitions and made module definitions for supports and lugs.
2014-02-22
Paul Boddie
files
Introduced the slight "inset" of the PCB support.
2014-02-22
Paul Boddie
files
Incorporated measurements from Dave H's CAD file.
2014-01-20
Paul Boddie
files
Added copyright and licensing information.
2014-01-20
Paul Boddie
files
Added a justify module in order to simplify some transformation code.
2014-01-20
Paul Boddie
files
Added a cube_at "macro" to reduce duplication somewhat.
2014-01-20
Paul Boddie
files
Added transformations to show the front and back parts side by side.
2014-01-20
Paul Boddie
files
Fixed positioning of PCB support strut bumps along with various measurements.
2014-01-20
Paul Boddie
files
Made the left and right bumps in the PCB support struts different.
2014-01-20
Paul Boddie
files
Added rudimentary bumps to the PCB support struts on the back part of the cartridge.
2014-01-19
Paul Boddie
files
Added PCB support struts to the front part of the cartridge.
2014-01-19
Paul Boddie
files
Added PCB support struts to the back part of the cartridge.
2014-01-19
Paul Boddie
files
Separated the parts in order to be able to generate an STL file.
2014-01-19
Paul Boddie
files
Added extra height to the cuboid used for filleting/rounding.
2014-01-19
Paul Boddie
files
Moved incorrectly located removal of the inner top portion of the front part.
2014-01-19
Paul Boddie
files
Separated the front and back parts of the cartridge for individual manipulation.
2014-01-19
Paul Boddie
files
Fixed the rounding of the top edges for the two separate parts.
(0)
-60
tip