paul@218 | 1 | /* |
paul@218 | 2 | * Access various peripherals on a board using the JZ4780. |
paul@218 | 3 | * |
paul@218 | 4 | * Copyright (C) 2023 Paul Boddie <paul@boddie.org.uk> |
paul@218 | 5 | * |
paul@218 | 6 | * This program is free software; you can redistribute it and/or |
paul@218 | 7 | * modify it under the terms of the GNU General Public License as |
paul@218 | 8 | * published by the Free Software Foundation; either version 2 of |
paul@218 | 9 | * the License, or (at your option) any later version. |
paul@218 | 10 | * |
paul@218 | 11 | * This program is distributed in the hope that it will be useful, |
paul@218 | 12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
paul@218 | 13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
paul@218 | 14 | * GNU General Public License for more details. |
paul@218 | 15 | * |
paul@218 | 16 | * You should have received a copy of the GNU General Public License |
paul@218 | 17 | * along with this program; if not, write to the Free Software |
paul@218 | 18 | * Foundation, Inc., 51 Franklin Street, Fifth Floor, |
paul@218 | 19 | * Boston, MA 02110-1301, USA |
paul@218 | 20 | */ |
paul@218 | 21 | |
paul@221 | 22 | /* NOTE: AIC support should be replaced. The CI20 should be able to send I2S |
paul@221 | 23 | audio over HDMI or via its internal codec to the headphone socket. */ |
paul@221 | 24 | |
paul@221 | 25 | #include <l4/devices/aic-x1600.h> |
paul@221 | 26 | |
paul@218 | 27 | #include <l4/devices/cpm-jz4780.h> |
paul@218 | 28 | #include <l4/devices/dma-jz4780.h> |
paul@218 | 29 | #include <l4/devices/gpio-jz4780.h> |
paul@218 | 30 | #include <l4/devices/i2c-jz4780.h> |
paul@221 | 31 | |
paul@222 | 32 | /* GPIO-based SPI can use arbitrary pins, whereas on the CI20 only the secondary |
paul@222 | 33 | header provides pins like GPC. */ |
paul@221 | 34 | |
paul@218 | 35 | #include <l4/devices/spi-gpio.h> |
paul@222 | 36 | #include <l4/devices/spi-hybrid.h> |
paul@221 | 37 | #include <l4/devices/spi-jz4780.h> |
paul@218 | 38 | #include "common.h" |
paul@218 | 39 | |
paul@218 | 40 | |
paul@218 | 41 | |
paul@218 | 42 | /* AIC adapter functions. */ |
paul@218 | 43 | |
paul@218 | 44 | void *aic_init(l4_addr_t aic_start, l4_addr_t start, l4_addr_t end, void *cpm) |
paul@218 | 45 | { |
paul@218 | 46 | return x1600_aic_init(aic_start, start, end, cpm); |
paul@218 | 47 | } |
paul@218 | 48 | |
paul@218 | 49 | void *aic_get_channel(void *aic, int num, void *channel) |
paul@218 | 50 | { |
paul@218 | 51 | return x1600_aic_get_channel(aic, num, channel); |
paul@218 | 52 | } |
paul@218 | 53 | |
paul@221 | 54 | unsigned int aic_transfer(void *channel, l4re_dma_space_dma_addr_t paddr, |
paul@221 | 55 | uint32_t count, uint32_t sample_rate, |
paul@221 | 56 | uint8_t sample_size) |
paul@218 | 57 | { |
paul@221 | 58 | return x1600_aic_transfer(channel, paddr, count, sample_rate, sample_size); |
paul@218 | 59 | } |
paul@218 | 60 | |
paul@218 | 61 | |
paul@218 | 62 | |
paul@218 | 63 | /* CPM adapter functions. */ |
paul@218 | 64 | |
paul@218 | 65 | void *cpm_init(l4_addr_t cpm_base) |
paul@218 | 66 | { |
paul@218 | 67 | return jz4780_cpm_init(cpm_base); |
paul@218 | 68 | } |
paul@218 | 69 | |
paul@218 | 70 | const char *cpm_clock_type(void *cpm, enum Clock_identifiers clock) |
paul@218 | 71 | { |
paul@218 | 72 | return jz4780_cpm_clock_type(cpm, clock); |
paul@218 | 73 | } |
paul@218 | 74 | |
paul@218 | 75 | int cpm_have_clock(void *cpm, enum Clock_identifiers clock) |
paul@218 | 76 | { |
paul@218 | 77 | return jz4780_cpm_have_clock(cpm, clock); |
paul@218 | 78 | } |
paul@218 | 79 | |
paul@218 | 80 | void cpm_start_clock(void *cpm, enum Clock_identifiers clock) |
paul@218 | 81 | { |
paul@218 | 82 | jz4780_cpm_start_clock(cpm, clock); |
paul@218 | 83 | } |
paul@218 | 84 | |
paul@218 | 85 | void cpm_stop_clock(void *cpm, enum Clock_identifiers clock) |
paul@218 | 86 | { |
paul@218 | 87 | jz4780_cpm_stop_clock(cpm, clock); |
paul@218 | 88 | } |
paul@218 | 89 | |
paul@218 | 90 | int cpm_get_parameters(void *cpm, enum Clock_identifiers clock, |
paul@218 | 91 | uint32_t parameters[]) |
paul@218 | 92 | { |
paul@218 | 93 | return jz4780_cpm_get_parameters(cpm, clock, parameters); |
paul@218 | 94 | } |
paul@218 | 95 | |
paul@218 | 96 | int cpm_set_parameters(void *cpm, enum Clock_identifiers clock, |
paul@218 | 97 | int num_parameters, uint32_t parameters[]) |
paul@218 | 98 | { |
paul@218 | 99 | return jz4780_cpm_set_parameters(cpm, clock, num_parameters, parameters); |
paul@218 | 100 | } |
paul@218 | 101 | |
paul@218 | 102 | uint8_t cpm_get_source(void *cpm, enum Clock_identifiers clock) |
paul@218 | 103 | { |
paul@218 | 104 | return jz4780_cpm_get_source(cpm, clock); |
paul@218 | 105 | } |
paul@218 | 106 | |
paul@218 | 107 | void cpm_set_source(void *cpm, enum Clock_identifiers clock, uint8_t source) |
paul@218 | 108 | { |
paul@218 | 109 | jz4780_cpm_set_source(cpm, clock, source); |
paul@218 | 110 | } |
paul@218 | 111 | |
paul@218 | 112 | enum Clock_identifiers cpm_get_source_clock(void *cpm, enum Clock_identifiers clock) |
paul@218 | 113 | { |
paul@218 | 114 | return jz4780_cpm_get_source_clock(cpm, clock); |
paul@218 | 115 | } |
paul@218 | 116 | |
paul@218 | 117 | void cpm_set_source_clock(void *cpm, enum Clock_identifiers clock, enum Clock_identifiers source) |
paul@218 | 118 | { |
paul@218 | 119 | jz4780_cpm_set_source_clock(cpm, clock, source); |
paul@218 | 120 | } |
paul@218 | 121 | |
paul@218 | 122 | uint64_t cpm_get_source_frequency(void *cpm, enum Clock_identifiers clock) |
paul@218 | 123 | { |
paul@218 | 124 | return jz4780_cpm_get_source_frequency(cpm, clock); |
paul@218 | 125 | } |
paul@218 | 126 | |
paul@218 | 127 | uint64_t cpm_get_frequency(void *cpm, enum Clock_identifiers clock) |
paul@218 | 128 | { |
paul@218 | 129 | return jz4780_cpm_get_frequency(cpm, clock); |
paul@218 | 130 | } |
paul@218 | 131 | |
paul@218 | 132 | int cpm_set_frequency(void *cpm, enum Clock_identifiers clock, uint64_t frequency) |
paul@218 | 133 | { |
paul@218 | 134 | return jz4780_cpm_set_frequency(cpm, clock, frequency); |
paul@218 | 135 | } |
paul@218 | 136 | |
paul@218 | 137 | |
paul@218 | 138 | |
paul@218 | 139 | /* DMA adapter functions. */ |
paul@218 | 140 | |
paul@218 | 141 | void *dma_init(l4_addr_t start, l4_addr_t end, void *cpm) |
paul@218 | 142 | { |
paul@218 | 143 | return jz4780_dma_init(start, end, cpm); |
paul@218 | 144 | } |
paul@218 | 145 | |
paul@218 | 146 | void dma_disable(void *dma_chip) |
paul@218 | 147 | { |
paul@218 | 148 | jz4780_dma_disable(dma_chip); |
paul@218 | 149 | } |
paul@218 | 150 | |
paul@218 | 151 | void dma_enable(void *dma_chip) |
paul@218 | 152 | { |
paul@218 | 153 | jz4780_dma_enable(dma_chip); |
paul@218 | 154 | } |
paul@218 | 155 | |
paul@218 | 156 | void *dma_get_channel(void *dma, uint8_t channel, l4_cap_idx_t irq) |
paul@218 | 157 | { |
paul@218 | 158 | return jz4780_dma_get_channel(dma, channel, irq); |
paul@218 | 159 | } |
paul@218 | 160 | |
paul@218 | 161 | unsigned int dma_transfer(void *dma_channel, |
paul@218 | 162 | uint32_t source, uint32_t destination, |
paul@218 | 163 | unsigned int count, |
paul@218 | 164 | int source_increment, int destination_increment, |
paul@218 | 165 | uint8_t source_width, uint8_t destination_width, |
paul@218 | 166 | uint8_t transfer_unit_size, |
paul@218 | 167 | int type) |
paul@218 | 168 | { |
paul@218 | 169 | return jz4780_dma_transfer(dma_channel, source, destination, count, |
paul@218 | 170 | source_increment, destination_increment, |
paul@218 | 171 | source_width, destination_width, |
paul@218 | 172 | transfer_unit_size, type); |
paul@218 | 173 | } |
paul@218 | 174 | |
paul@218 | 175 | unsigned int dma_wait(void *dma_channel) |
paul@218 | 176 | { |
paul@218 | 177 | return jz4780_dma_wait(dma_channel); |
paul@218 | 178 | } |
paul@218 | 179 | |
paul@218 | 180 | |
paul@218 | 181 | |
paul@218 | 182 | /* GPIO adapter functions. */ |
paul@218 | 183 | |
paul@218 | 184 | void *gpio_init(l4_addr_t start, l4_addr_t end, unsigned pins, |
paul@218 | 185 | l4_uint32_t pull_ups, l4_uint32_t pull_downs) |
paul@218 | 186 | { |
paul@218 | 187 | return jz4780_gpio_init(start, end, pins, pull_ups, pull_downs); |
paul@218 | 188 | } |
paul@218 | 189 | |
paul@218 | 190 | void gpio_setup(void *gpio, unsigned pin, unsigned mode, int value) |
paul@218 | 191 | { |
paul@218 | 192 | jz4780_gpio_setup(gpio, pin, mode, value); |
paul@218 | 193 | } |
paul@218 | 194 | |
paul@218 | 195 | void gpio_config_pull(void *gpio, unsigned pin, unsigned mode) |
paul@218 | 196 | { |
paul@218 | 197 | jz4780_gpio_config_pull(gpio, pin, mode); |
paul@218 | 198 | } |
paul@218 | 199 | |
paul@218 | 200 | void gpio_config_pad(void *gpio, unsigned pin, unsigned func, unsigned value) |
paul@218 | 201 | { |
paul@218 | 202 | jz4780_gpio_config_pad(gpio, pin, func, value); |
paul@218 | 203 | } |
paul@218 | 204 | |
paul@218 | 205 | void gpio_config_get(void *gpio, unsigned pin, unsigned reg, unsigned *value) |
paul@218 | 206 | { |
paul@218 | 207 | jz4780_gpio_config_get(gpio, pin, reg, value); |
paul@218 | 208 | } |
paul@218 | 209 | |
paul@218 | 210 | void gpio_config_pad_get(void *gpio, unsigned pin, unsigned *func, unsigned *value) |
paul@218 | 211 | { |
paul@218 | 212 | jz4780_gpio_config_pad_get(gpio, pin, func, value); |
paul@218 | 213 | } |
paul@218 | 214 | |
paul@218 | 215 | void gpio_multi_setup(void *gpio, Pin_slice const *mask, unsigned mode, unsigned outvalues) |
paul@218 | 216 | { |
paul@218 | 217 | jz4780_gpio_multi_setup(gpio, mask, mode, outvalues); |
paul@218 | 218 | } |
paul@218 | 219 | |
paul@218 | 220 | void gpio_multi_config_pad(void *gpio, Pin_slice const *mask, unsigned func, unsigned value) |
paul@218 | 221 | { |
paul@218 | 222 | jz4780_gpio_multi_config_pad(gpio, mask, func, value); |
paul@218 | 223 | } |
paul@218 | 224 | |
paul@218 | 225 | void gpio_multi_set(void *gpio, Pin_slice const *mask, unsigned data) |
paul@218 | 226 | { |
paul@218 | 227 | jz4780_gpio_multi_set(gpio, mask, data); |
paul@218 | 228 | } |
paul@218 | 229 | |
paul@218 | 230 | unsigned gpio_multi_get(void *gpio, unsigned offset) |
paul@218 | 231 | { |
paul@218 | 232 | return jz4780_gpio_multi_get(gpio, offset); |
paul@218 | 233 | } |
paul@218 | 234 | |
paul@218 | 235 | int gpio_get(void *gpio, unsigned pin) |
paul@218 | 236 | { |
paul@218 | 237 | return jz4780_gpio_get(gpio, pin); |
paul@218 | 238 | } |
paul@218 | 239 | |
paul@218 | 240 | void gpio_set(void *gpio, unsigned pin, int value) |
paul@218 | 241 | { |
paul@218 | 242 | jz4780_gpio_set(gpio, pin, value); |
paul@218 | 243 | } |
paul@218 | 244 | |
paul@218 | 245 | void *gpio_get_irq(void *gpio, unsigned pin) |
paul@218 | 246 | { |
paul@218 | 247 | return jz4780_gpio_get_irq(gpio, pin); |
paul@218 | 248 | } |
paul@218 | 249 | |
paul@218 | 250 | bool gpio_irq_set_mode(void *gpio_irq, unsigned mode) |
paul@218 | 251 | { |
paul@218 | 252 | return jz4780_gpio_irq_set_mode(gpio_irq, mode); |
paul@218 | 253 | } |
paul@218 | 254 | |
paul@218 | 255 | |
paul@218 | 256 | |
paul@218 | 257 | /* I2C adapter functions. */ |
paul@218 | 258 | |
paul@218 | 259 | void *i2c_init(l4_addr_t start, l4_addr_t end, void *cpm, |
paul@218 | 260 | uint32_t frequency) |
paul@218 | 261 | { |
paul@218 | 262 | return jz4780_i2c_init(start, end, cpm, frequency); |
paul@218 | 263 | } |
paul@218 | 264 | |
paul@218 | 265 | void *i2c_get_channel(void *i2c, uint8_t channel) |
paul@218 | 266 | { |
paul@218 | 267 | return jz4780_i2c_get_channel(i2c, channel); |
paul@218 | 268 | } |
paul@218 | 269 | |
paul@218 | 270 | uint32_t i2c_get_frequency(void *i2c_channel) |
paul@218 | 271 | { |
paul@218 | 272 | return jz4780_i2c_get_frequency(i2c_channel); |
paul@218 | 273 | } |
paul@218 | 274 | |
paul@218 | 275 | void i2c_set_target(void *i2c_channel, uint8_t addr) |
paul@218 | 276 | { |
paul@218 | 277 | return jz4780_i2c_set_target(i2c_channel, addr); |
paul@218 | 278 | } |
paul@218 | 279 | |
paul@218 | 280 | void i2c_start_read(void *i2c_channel, uint8_t buf[], unsigned int total, |
paul@218 | 281 | int stop) |
paul@218 | 282 | { |
paul@218 | 283 | jz4780_i2c_start_read(i2c_channel, buf, total, stop); |
paul@218 | 284 | } |
paul@218 | 285 | |
paul@218 | 286 | void i2c_read(void *i2c_channel) |
paul@218 | 287 | { |
paul@218 | 288 | jz4780_i2c_read(i2c_channel); |
paul@218 | 289 | } |
paul@218 | 290 | |
paul@218 | 291 | void i2c_start_write(void *i2c_channel, uint8_t buf[], unsigned int total, |
paul@218 | 292 | int stop) |
paul@218 | 293 | { |
paul@218 | 294 | jz4780_i2c_start_write(i2c_channel, buf, total, stop); |
paul@218 | 295 | } |
paul@218 | 296 | |
paul@218 | 297 | void i2c_write(void *i2c_channel) |
paul@218 | 298 | { |
paul@218 | 299 | jz4780_i2c_write(i2c_channel); |
paul@218 | 300 | } |
paul@218 | 301 | |
paul@218 | 302 | int i2c_read_done(void *i2c_channel) |
paul@218 | 303 | { |
paul@218 | 304 | return jz4780_i2c_read_done(i2c_channel); |
paul@218 | 305 | } |
paul@218 | 306 | |
paul@218 | 307 | int i2c_write_done(void *i2c_channel) |
paul@218 | 308 | { |
paul@218 | 309 | return jz4780_i2c_write_done(i2c_channel); |
paul@218 | 310 | } |
paul@218 | 311 | |
paul@218 | 312 | unsigned int i2c_have_read(void *i2c_channel) |
paul@218 | 313 | { |
paul@218 | 314 | return jz4780_i2c_have_read(i2c_channel); |
paul@218 | 315 | } |
paul@218 | 316 | |
paul@218 | 317 | unsigned int i2c_have_written(void *i2c_channel) |
paul@218 | 318 | { |
paul@218 | 319 | return jz4780_i2c_have_written(i2c_channel); |
paul@218 | 320 | } |
paul@218 | 321 | |
paul@218 | 322 | int i2c_failed(void *i2c_channel) |
paul@218 | 323 | { |
paul@218 | 324 | return jz4780_i2c_failed(i2c_channel); |
paul@218 | 325 | } |
paul@218 | 326 | |
paul@218 | 327 | void i2c_stop(void *i2c_channel) |
paul@218 | 328 | { |
paul@218 | 329 | jz4780_i2c_stop(i2c_channel); |
paul@218 | 330 | } |
paul@218 | 331 | |
paul@218 | 332 | |
paul@218 | 333 | |
paul@218 | 334 | /* SPI adapter functions. */ |
paul@218 | 335 | |
paul@221 | 336 | void *spi_init(l4_addr_t spi_start, l4_addr_t start, l4_addr_t end, void *cpm) |
paul@218 | 337 | { |
paul@221 | 338 | return jz4780_spi_init(spi_start, start, end, cpm); |
paul@221 | 339 | } |
paul@221 | 340 | |
paul@222 | 341 | void *spi_get_channel(void *spi, uint8_t num, void *channel, uint64_t frequency, |
paul@222 | 342 | void *control_chip, int control_pin, int control_alt_func) |
paul@221 | 343 | { |
paul@222 | 344 | void *ch = jz4780_spi_get_channel(spi, num, channel, frequency); |
paul@222 | 345 | |
paul@222 | 346 | return spi_hybrid_get_channel(ch, control_chip, control_pin, control_alt_func); |
paul@218 | 347 | } |
paul@218 | 348 | |
paul@222 | 349 | void *spi_get_channel_gpio(uint64_t frequency, |
paul@222 | 350 | void *clock_chip, int clock_pin, |
paul@221 | 351 | void *data_chip, int data_pin, |
paul@221 | 352 | void *enable_chip, int enable_pin, |
paul@222 | 353 | void *control_chip, int control_pin) |
paul@221 | 354 | { |
paul@222 | 355 | return spi_gpio_get_channel(frequency, clock_chip, clock_pin, data_chip, |
paul@222 | 356 | data_pin, enable_chip, enable_pin, control_chip, |
paul@222 | 357 | control_pin); |
paul@222 | 358 | } |
paul@222 | 359 | |
paul@222 | 360 | void spi_acquire_control(void *channel, int level) |
paul@222 | 361 | { |
paul@222 | 362 | spi_hybrid_acquire_control(channel, level); |
paul@221 | 363 | } |
paul@221 | 364 | |
paul@222 | 365 | void spi_release_control(void *channel) |
paul@221 | 366 | { |
paul@222 | 367 | spi_hybrid_release_control(channel); |
paul@221 | 368 | } |
paul@221 | 369 | |
paul@222 | 370 | void spi_send_gpio(void *channel, uint32_t bytes, const uint8_t data[]) |
paul@218 | 371 | { |
paul@218 | 372 | spi_gpio_send(channel, bytes, data); |
paul@218 | 373 | } |
paul@218 | 374 | |
paul@222 | 375 | void spi_send_units(void *channel, uint32_t bytes, const uint8_t data[], |
paul@222 | 376 | uint8_t unit_size, uint8_t char_size) |
paul@222 | 377 | { |
paul@222 | 378 | jz4780_spi_send_units(channel, bytes, data, unit_size, char_size); |
paul@222 | 379 | } |
paul@222 | 380 | |
paul@221 | 381 | uint32_t spi_transfer(void *channel, l4re_dma_space_dma_addr_t paddr, |
paul@223 | 382 | uint32_t count, uint8_t unit_size, uint8_t char_size, |
paul@223 | 383 | l4_addr_t desc_vaddr, l4re_dma_space_dma_addr_t desc_paddr) |
paul@221 | 384 | { |
paul@222 | 385 | /* Transfer is not supported by the common interface. */ |
paul@222 | 386 | |
paul@222 | 387 | void *ch = spi_hybrid_get_raw_channel(channel); |
paul@222 | 388 | |
paul@223 | 389 | return jz4780_spi_transfer_descriptor(ch, paddr, count, unit_size, char_size, |
paul@223 | 390 | desc_vaddr, desc_paddr); |
paul@221 | 391 | } |
paul@221 | 392 | |
paul@218 | 393 | |
paul@218 | 394 | |
paul@218 | 395 | /* Memory regions. */ |
paul@218 | 396 | |
paul@218 | 397 | const char *memory_regions[] = { |
paul@218 | 398 | [AIC] = "jz4780-aic", |
paul@218 | 399 | [CPM] = "jz4780-cpm", |
paul@218 | 400 | [DMA] = "jz4780-dma", |
paul@218 | 401 | [GPIO] = "jz4780-gpio", |
paul@218 | 402 | [I2C] = "jz4780-i2c", |
paul@221 | 403 | [SSI] = "jz4780-ssi", |
paul@218 | 404 | }; |
paul@218 | 405 | |
paul@218 | 406 | |
paul@218 | 407 | |
paul@218 | 408 | /* AIC definitions. */ |
paul@218 | 409 | |
paul@218 | 410 | void *aic_channels[] = {NULL, NULL}; |
paul@218 | 411 | |
paul@218 | 412 | const unsigned int num_aic_channels = 2; |
paul@218 | 413 | |
paul@218 | 414 | l4_cap_idx_t aic_irqs[] = {L4_INVALID_CAP}; |
paul@218 | 415 | |
paul@218 | 416 | |
paul@218 | 417 | |
paul@218 | 418 | /* CPM definitions. */ |
paul@218 | 419 | |
paul@218 | 420 | struct clock_info clocks[] = { |
paul@218 | 421 | {"ext", Clock_external, "External"}, |
paul@218 | 422 | {"plla", Clock_pll_A, "PLL A"}, |
paul@218 | 423 | {"plle", Clock_pll_E, "PLL E"}, |
paul@218 | 424 | {"pllm", Clock_pll_M, "PLL M"}, |
paul@218 | 425 | {"pllv", Clock_pll_V, "PLL V"}, |
paul@218 | 426 | {"main", Clock_main, "Main"}, |
paul@218 | 427 | {"cpu", Clock_cpu, "CPU"}, |
paul@218 | 428 | {"h2p", Clock_hclock2_pclock, "AHB2/APB"}, |
paul@218 | 429 | {"ahb0", Clock_hclock0, "AHB0"}, |
paul@218 | 430 | {"ahb2", Clock_hclock2, "AHB2"}, |
paul@218 | 431 | {"apb", Clock_pclock, "APB"}, |
paul@218 | 432 | {"dma", Clock_dma, "DMA"}, |
paul@218 | 433 | {"hdmi", Clock_lcd, "HDMI"}, |
paul@218 | 434 | {"lcd", Clock_lcd, "LCD"}, |
paul@218 | 435 | {"lcd0", Clock_lcd_pixel0, "LCD0 pixel"}, |
paul@218 | 436 | {"lcd1", Clock_lcd_pixel1, "LCD1 pixel"}, |
paul@218 | 437 | {"msc", Clock_msc, "MSC"}, |
paul@218 | 438 | {"msc0", Clock_msc0, "MSC0"}, |
paul@218 | 439 | {"msc1", Clock_msc1, "MSC1"}, |
paul@218 | 440 | {"msc2", Clock_msc1, "MSC2"}, |
paul@218 | 441 | {"otg0", Clock_otg0, "USB OTG0"}, |
paul@218 | 442 | {"otg1", Clock_otg1, "USB OTG1"}, |
paul@218 | 443 | {"i2c0", Clock_i2c0, "I2C0"}, |
paul@218 | 444 | {"i2c1", Clock_i2c1, "I2C1"}, |
paul@218 | 445 | {"i2c2", Clock_i2c2, "I2C2"}, |
paul@218 | 446 | {"i2c3", Clock_i2c3, "I2C3"}, |
paul@218 | 447 | {"i2c4", Clock_i2c4, "I2C4"}, |
paul@218 | 448 | {"i2s0", Clock_i2s0, "I2S0"}, |
paul@218 | 449 | {"i2s1", Clock_i2s1, "I2S1"}, |
paul@218 | 450 | {"pcm", Clock_pcm, "PCM"}, |
paul@218 | 451 | {"ssi", Clock_ssi, "SSI"}, |
paul@218 | 452 | {"ssi0", Clock_ssi0, "SSI0"}, |
paul@218 | 453 | {"ssi1", Clock_ssi1, "SSI1"}, |
paul@218 | 454 | {"uart0", Clock_uart0, "UART0"}, |
paul@218 | 455 | {"uart1", Clock_uart1, "UART1"}, |
paul@218 | 456 | {"uart2", Clock_uart2, "UART2"}, |
paul@218 | 457 | {"uart3", Clock_uart3, "UART3"}, |
paul@218 | 458 | {"uart4", Clock_uart4, "UART4"}, |
paul@218 | 459 | {NULL, Clock_undefined, NULL}, |
paul@218 | 460 | }; |
paul@218 | 461 | |
paul@218 | 462 | |
paul@218 | 463 | |
paul@218 | 464 | /* DMA definitions. */ |
paul@218 | 465 | |
paul@218 | 466 | void *dma_channels[32] = {NULL}; |
paul@218 | 467 | |
paul@218 | 468 | const unsigned int num_dma_channels = 32; |
paul@218 | 469 | |
paul@221 | 470 | struct dma_region dma_regions[8]; |
paul@218 | 471 | |
paul@221 | 472 | const unsigned int num_dma_regions = 8; |
paul@218 | 473 | |
paul@218 | 474 | l4_cap_idx_t dma_irq = L4_INVALID_CAP; |
paul@218 | 475 | |
paul@218 | 476 | |
paul@218 | 477 | |
paul@218 | 478 | /* GPIO definitions. */ |
paul@218 | 479 | |
paul@218 | 480 | struct gpio_port gpio_ports[] = { |
paul@218 | 481 | {0x3fff00ff, 0x00000000}, |
paul@218 | 482 | {0xfff0f3fc, 0x000f0c03}, |
paul@218 | 483 | {0x0fffffff, 0x00000000}, |
paul@218 | 484 | {0xffff4fff, 0x0000b000}, |
paul@218 | 485 | {0xf0fff37c, 0x00000483}, |
paul@218 | 486 | {0x7fa7f00f, 0x00580ff0}, |
paul@218 | 487 | }; |
paul@218 | 488 | |
paul@218 | 489 | const unsigned int num_gpio_ports = 6; |
paul@218 | 490 | |
paul@218 | 491 | const char gpio_port_labels[] = "ABCDEF"; |
paul@218 | 492 | |
paul@218 | 493 | |
paul@218 | 494 | |
paul@218 | 495 | /* I2C definitions. */ |
paul@218 | 496 | |
paul@218 | 497 | void *i2c_channels[] = {NULL, NULL, NULL, NULL, NULL}; |
paul@218 | 498 | |
paul@218 | 499 | const unsigned int num_i2c_channels = 5; |
paul@218 | 500 | |
paul@218 | 501 | l4_cap_idx_t i2c_irqs[] = {L4_INVALID_CAP, L4_INVALID_CAP}; |
paul@218 | 502 | |
paul@218 | 503 | |
paul@218 | 504 | |
paul@218 | 505 | /* SPI definitions. */ |
paul@218 | 506 | |
paul@218 | 507 | void *spi_channels[] = {NULL, NULL}; |
paul@218 | 508 | |
paul@218 | 509 | const unsigned int num_spi_channels = 2; |