1.1 --- a/README.txt Tue Jun 09 23:55:00 2015 +0200
1.2 +++ b/README.txt Tue Jun 09 23:59:24 2015 +0200
1.3 @@ -8,13 +8,27 @@
1.4 routines for "bare metal" software usage in order to illustrate the
1.5 initialisation requirements and to make it possible to deploy other software.
1.6
1.7 +The payloads can be deployed on the Ben NanoNote using the USB boot mode as
1.8 +described on the Qi-Hardware site:
1.9 +
1.10 +http://en.qi-hardware.com/wiki/USB_BOOT_mode
1.11 +
1.12 +A suitable command can be issued on a USB host machine as follows (given
1.13 +sufficient privileges):
1.14 +
1.15 +usbboot -c 'boot' -1 stage1/stage1.bin -2 stage2/stage2.bin
1.16 +
1.17 +An attempt has been made to also generate payloads for the jz4730-based
1.18 +MiniPC/Mipsbook/Minibook device. This device does not appear to support USB
1.19 +boot mode, and thus any payloads will need to be deployed by other means.
1.20 +
1.21 Related U-Boot Resources
1.22 ------------------------
1.23
1.24 -Some resources may only exist in the branch of U-Boot identified as
1.25 -u-boot-2012.10-rc2 when configuring OpenWrt. Others may exist in the principal
1.26 -U-Boot development branch, but differ between that branch and the previous
1.27 -XBurst-supporting branch.
1.28 +For the Ben NanoNote, some resources may only exist in the branch of U-Boot
1.29 +identified as u-boot-2012.10-rc2 when configuring OpenWrt. Others may exist in
1.30 +the principal U-Boot development branch, but differ between that branch and
1.31 +the previous XBurst-supporting branch.
1.32
1.33 arch/mips/cpu/xburst/jz4740.c RAM and clock-related initialisation
1.34 arch/mips/lib/board.c generic board initialisation