1 /* 2 * Initialisation code for the stage 2 payload. 3 * 4 * Copyright 2009 (C) Qi Hardware Inc. 5 * Author: Wolfgang Spraul <wolfgang@sharism.cc> 6 * 7 * Copyright (C) 2015, 2016 Paul Boddie <paul@boddie.org.uk> 8 * 9 * This program is free software: you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License as published by 11 * the Free Software Foundation, either version 3 of the License, or 12 * (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program. If not, see <http://www.gnu.org/licenses/>. 21 */ 22 23 #include "sdram.h" 24 25 .text 26 .extern c_main 27 .extern _tlb_entry 28 .extern _exc_entry 29 .extern _irq_entry 30 .extern _end_entries 31 .extern _got_start 32 .extern _got_end 33 .extern _got_copy_start 34 .extern enter_task 35 .globl _start 36 .globl _enter_task 37 .set noreorder 38 39 _start: 40 b real_start 41 nop 42 43 /* Apparently reserved region which, if used, breaks the USB Boot process. */ 44 45 .word 0 46 .word 0 47 .word 0 48 .word 0 49 .word 0 50 .word 0 51 .word 0 52 .word 0 53 54 real_start: 55 /* Initialise the stack. */ 56 57 la $sp, 0x80080000 58 59 /* Initialise the globals pointer. */ 60 61 lui $gp, %hi(_GLOBAL_OFFSET_TABLE_) 62 ori $gp, $gp, %lo(_GLOBAL_OFFSET_TABLE_) 63 64 move $k0, $ra 65 66 /* Copy TLB handling instructions. */ 67 68 la $t0, _tlb_entry /* start */ 69 li $t1, 0x80000000 70 la $t2, _exc_entry /* end */ 71 jal _copy 72 nop 73 74 /* Copy exception handling instructions. */ 75 76 la $t0, _exc_entry /* start */ 77 li $t1, 0x80000180 78 la $t2, _irq_entry /* end */ 79 jal _copy 80 nop 81 82 /* Copy IRQ handling instructions. */ 83 84 la $t0, _irq_entry /* start */ 85 li $t1, 0x80000200 86 la $t2, _end_entries /* end */ 87 jal _copy 88 nop 89 90 /* Copy the offset table for user mode programs. */ 91 92 la $t0, _got_start /* start */ 93 la $t1, _got_copy_start 94 la $t2, _got_end /* end */ 95 li $t3, 0x80000000 /* adjustment */ 96 jal _copy_adjust 97 nop 98 99 move $ra, $k0 100 101 /* Enable caching. */ 102 103 li $t0, CONFIG_CM_CACHABLE_NONCOHERENT 104 mtc0 $t0, $16 /* CP0_CONFIG */ 105 nop 106 107 /* Set up the enter task reference for convenience. */ 108 109 la $t0, enter_task 110 li $t1, 0x80000000 111 /* subu $t0, $t0, $t1 */ 112 la $t1, _enter_task 113 sw $t0, 0($t1) 114 115 /* Start the program. */ 116 117 la $t9, c_main /* load the address of the routine */ 118 j c_main 119 nop 120 121 _enter_task: 122 .word 0 123 124 _copy: 125 /* Copy via $t3 the region from $t0 to $t2 into $t1. */ 126 127 lw $t3, 0($t0) 128 addiu $t0, $t0, 4 129 sw $t3, 0($t1) 130 bne $t0, $t2, _copy 131 addiu $t1, $t1, 4 /* executed in delay slot before branch */ 132 jr $ra 133 nop 134 135 _copy_adjust: 136 /* Copy via $t4 the region from $t0 to $t2 into $t1, adjusting by $t3. */ 137 138 lw $t4, 0($t0) 139 addiu $t0, $t0, 4 140 subu $t4, $t4, $t3 141 sw $t4, 0($t1) 142 bne $t0, $t2, _copy_adjust 143 addiu $t1, $t1, 4 /* executed in delay slot before branch */ 144 jr $ra 145 nop 146 147 .set reorder